Inclined Belt Systems
Inclined Belt Parts Cleaning Systems provide effective part cleaning and drying to meet your high-production cleaning requirements. Systems are available in single or multi-stage configurations to suit virtually any type of cleaning application including washing, rinsing, rust inhibiting, and drying.
 |
- 2 Stage 12" Inclined Belt/RP Flush
- 2 Stage 12" Inclined Belt
- 3 Stage 12" Inclined Belt
- Multiple Stage Inclined Belt
|
Inclined Belt Systems were developed to process parts directly from your production equipment. The parts drop into an immersion stage, proceed up the inclined belt to the spray stage and level out for a blow off. A second spray stage can be added prior to the blow off. The parts can be loaded manually or automatically.
Rugged stainless steel construction provides superior durability, chemical resistance and quality appearance. Systems can be equipped with all popular heating systems including electric, gas or steam.
Standard features include:
- The tank and upper housing are constructed of 10 gauge, 304 stainless steel. 2" mineral wool insulation is covered by 16 gauge, polished, 304 stainless steel skin.
- A vertical centrifugal pump with carbon steel wetted parts is sized for the most effective coverage within the spray stage.
- Internal spray headers are designed to provide complete spray
- coverage throughout the cleaning process.
- A mild steel bag filter follows the pump. Each filter has two (2) pressure gauges to indicate the need for a filter bag change.
- Dual stainless steel mesh screens protect the pump suction.
- The tank is heated by a stainless steel immersion heater designed to maintain the specified temperature.
- Automatic liquid level controls fill the tank and protect the pump and heater.
- Each tank top is equipped with a maintenance access removable lid.
- The spray stage has a lift out access door that allows easy maintenance entry.
- Standard units have polypropylene belts with side guides and part processing flights. Belts are available in different materials and sizes.
- The blow off stage has a regenerative blower with a filter, relief valves, and gauges. A stainless steel tubular heater can be installed prior to the blower for dry off capabilities.
- Stainless steel air knives are positioned to direct air to the parts being processed.
- NEMA 12 main control panel.
- All guarding and labeling meets OSHA standard requirements.
|
Available Features:
- Stainless Steel Pumps and Filters
- Oil Coalescing System
- Custom Material Handling
- Chip Conveyor
- Exhaust System
- Automatic Chemical Metering
- Pressure Transducer to indicate filter maintenance
- NEMA Electrical Controls
|
|
