Liquid, mild alkaline cleaning compound with burnishing capabilities. Excellent for use with plastic media because of particle suspension and wetting agents. Good burnisher on non-ferrous parts with ceramic media. The pH is 9.
Description: Mildly alkaline blend of soil suspension agents, emulsifiers, wetting agents, chelating agents and lubricants. Moderate viscosity and clear in color. The pH is 8.9.
Application: RODECO 211 is designed for use in vibratory & tumble finishing processes. It is a universal material for deburring, burnishing, and cleaning of all metals and plastics.
- Excellent for suspending solid particle soils such as residue from fast cutting ceramic or plastic media and heavy treat scale.
- Removes shop oils and soils.
- Contains in-process inhibitors.
- Low to moderate foam.
- Best compound when clean rinsing and no residue are important.
Recommended Dilution: In a flow through system, 1/2 to 1 ounce per gallon of water can be used during abrasive cut down. For luster and brightness, 2 to 3 ounces per gallon of water will produce the best results. Flow rate of 1 to 1 1/2 gallon per hour per cubic foot of mass. Oily parts will require higher initial concentrations.
Disposal: RODECO 211 is biodegradable and contains no critical materials. To the best of our knowledge, it is safe to flush water solutions of RODECO 211 into sanitary sewer systems.
Please consult you local or state EPA Department to determine the correct disposal method of used finishing fluids.